Disques de rupture. Mélangeurs statiques. Échangeurs thermiques. Séparateurs de gouttes.

Banner Bursting Disks

Metal extruder bursting disks

Series S-EB
Types S-EB / S-EB-SVT

The S-EB series provides the overpressure protection of extruders as a purely passive safety element in addition to pressure and temperature sensors. The bursting disk body is screwed into the extruder housing in a manner that the bursting disc is positioned as close as possible to the product. Thus the bursting disc is not blocked by product deposits and can be opened unimpaired, in order to relieve unwanted overpressures – this is the only way the sensitive machine components can be protected reliably.

Design examples
Metal extruder design example

S-EB 45mm long

design example bursting disk

S-EB 460mm long

S-EB STRIKO – Extruder Bursting disk
S-EB-SVT STRIKO – Extruder Bursting disk
(SVT = integrated burst indicator)
Advantages in the application
  • can be delivered in different sizes and lengths
  • good working ratio: up to 80%
  • can be used as a purely passive safety element in addition to pressure and temperature sensors
  • S-EB-SVT with integrated burst indicator
  • ideal for use in case of high pressures and temperatures
Materials Stainless steels, Inconel, nickel, special materials such as hastelloy
Nominal width / length 3/16“ / 46mm up to 460mm (more upon request)
Burst pressures from 70 bar (g) to 1200 bar (g)
Work relationship 80 %
Burst tolerance min +/- 5 %
Utilisation temperature range depending on the application up to +500 ℃
Bursting disc holder not necessary
Vacuum support not necessary
Burst indicator see SEB-SVT

PDF Application Data Sheet Bursting Disks